nieceandtows@programming.dev to 3DPrinting@lemmy.worldEnglish · edit-22 months agoHaving issues with PETG. Is this bed leveling issue, bed dirty issue, wet filament issue, or something else?programming.devimagemessage-square27linkfedilinkarrow-up170arrow-down13file-text
arrow-up167arrow-down1imageHaving issues with PETG. Is this bed leveling issue, bed dirty issue, wet filament issue, or something else?programming.devnieceandtows@programming.dev to 3DPrinting@lemmy.worldEnglish · edit-22 months agomessage-square27linkfedilinkfile-text
minus-squareDultas@lemmy.worldlinkfedilinkEnglisharrow-up1·2 months agoIn my experience you still want to use soap and rinse occasionally. Since you don’t typically rinse with alcohol you can just move the oils around. Also depends on what % you use.
In my experience you still want to use soap and rinse occasionally. Since you don’t typically rinse with alcohol you can just move the oils around. Also depends on what % you use.